Hir Group

Floor Repair

HIR Rapid Floor Repair is a solvent or solvent free highly filled two parts heavy duty floor repairing. When applied on damaged concrete surface, it gives a high strength flooring & tank lining, capable to withstand extremely high loading, wear and chemical resistance. It just require max 6 hours for curing, walkable or normal usage.


  • Forms seamless surface
  • Very high mechanical strength
  • Excellent chemical resistance
  • Hygienic
  • Dust free surface
  • Hard wearing


  • HIR Rapid Floor Repair is highly recommended in use for factory floor & workshop
  • Automobiles
  • Food & pharmaceuticals
  • Chemical & Engineering
  • Beverages
  • Textile & Pulp-Paper
  • Electronic industries


Successful performance of HIR Rapid Floor Repair can achieve only after proper surface preparation. It is the prime requirement that surface must correctly prepared before application.

    • Surface must be free from any oils, grease, loose particles, curing aid chemicals, previously applied coating etc…
    • Surface must be fully dry.
    • For old surface all cracks, cavities should be repaired with Epoxy mortar


HIR Rapid Floor Repair

Mix the resin part A and curing agent part B with mixer. Until a homogeneous, lumps free mass is achieved. Then, place the mixed mortar evenly. Temp down with beam laid across steel screeding rails of specific height for desired thickness and finish with steel trowel to get smooth finish.

Application Trowel
Initial 6-7 Hrs Full 7 days
Gloss or Semi-Gloss
Mixing Ratio
As directed on Packing
As required
Part A :
8kg and 16kg
Part B :
2Kg and 4kg
Total :
10kg and 20kg